3D Printing at MARSfarm

Hardware Do-It-Yourself
5

I’m adding a few more parts from the MARSfarm Mini V0.23, including:

  1. The red clips from the vertical support posts
  2. The Top Corner from the vertical support posts
  3. The two parts of the CO2 Sensor Enclosure

This folder has them in both .STL and .3MF formats. Happy printing!
https://drive.google.com/drive/folders/1fSl_kg1EfBOBHozdOV3FdbCeUztMFzAN?usp=sharing